Tube Cleaning Equipments - Circular Tube Brushes For Boiler & Condenser Tube Cleaning: Tube Cleaners and Accessories Malaysia

Power Unit

Flexible Shafts

Tool Heads/Cutter

Brushes

Accecories

Model	Motor HP (KW)	Speed	Recommended Shaft Core diameter/length
FDM-WD 1.0	1 (0.75) 220V/ 50Hz/ 1 Phase	1,415 rpm	8, 10 mm Max 50ft
FDM-WD 1.5	1.5 (1.1) 220V/ 50Hz/ 1 Phase	1,415 rpm	12 mm Max 50ft
FDM-WD 3	2 (1.5) 415V/ 50Hz/ 3 Phase	1,415 rpm	12 mm Max 60ft
FDM-WD 3	3 (2.0) 415V/ 50Hz/ 3 Phase	1,415 rpm	12 and 15 mm Max 80ft

Electric Powered

-	FDM-WD electric powered tube cleaner comes along with water-proof IP65 PVC enclosure terminal box and 24VDC foot switch. Interchangeable flexible shaft connection allows wet or dry cleaning options.
-	It makes cleaning of tubes an easy and pleasant task. Typical applications includes heat exchanges, condensers, evaporators, absorptions machines and chillers.

Model	Flexible Shaft Speed	Air Motor Power	Air requirement
AWP100X	Variable- 500~3,000 rpm	1.8 HP Max	100 PSI @ 70 CFM Output torque : 46 lb in @ 2,500rpm
AWP100XX	Variable- 500~3,000 rpm	4 HP Max	100 PSI @ 130 CFM Output torque : 82 lb in @ 3,000rpm

Air Powered

-	The AWP series Air powered tube cleaner machine is applicable where electricity supply is unavailable.
-	Equipped with remote foot switch, It is portable and easy to operate. Simultanoues flush with water is possible to remove scale more effectively. Adjustable torque control enables rotation of shaft to be set at required speed in different application.

	FLEXIDRIVE flexible shafts offers Nylon and Galvanized steel casing for different cleaning purposes. Where simultaneous water flush is required, wet cleaning is possible by attaching our nylon casing flexible shaft to the tube cleaner machine.
	Galvanized steel casing flexible shafts are designed for its durability. Its heavy construction is well suited for most dry cleaning situations.

	Shaft No/ Length
1/8" Core x 6mm Casing OD	S701-25
1/4" Core x 10mm Casing OD	S702-45
5/16" Core x 12mm Casing OD	S703-25
5/16" Core x 12mm Casing OD	S703-45
3/8" Core x 14mm Casing OD	S704-25
3/8" Core x 14mm Casing OD	S704-35
1/2" Core x 18mm Casing OD	S720-35
	S720-40
	S720-50
5/8" Core x 22mm Casing OD	S722-40
	S722-50

	Length
3/8" Core x 19mm Casing OD	x 20 ft
3/8" Core x 19mm Casing OD	x 26 ft
1/2" Core x 24mm Casing OD	x 23 ft
	x 26 ft
	x 32 ft
5/8" Core x 29mm Casing OD	x 23 ft
	x 26 ft
	x 32 ft
	x 40 ft
	x 45 ft
	x 50 ft
	x 60 ft
	x 70 ft

Rotary Cutter

The orthodox tool for the removal of hard scale from straight and curved boiler tubes, etc.

Double Cone Cutter

Same as Single Cone Cutter but in double form.

Single Cone Cutter

Cone shaped cutter designed to penetrate through hard scales.

Disc Cone Cutter

Consisting of three cones, in a disc form assembly.

Tapered Cutter

Fast and safe removal of hard lining of scale, typically used in evaporator and juice heater tubes.

Pivoted Arm Cutter

Consisting of three arms and a small cone in each arm to provide a slight “drilling” effect.

Spiral Tube Brush for Tube Cleaner Machine

Description

Brass and Nylon are recommended in removing softer scales for non-ferrous condensor or heat exchanger tubes. Steel is suitable for ferrous metals such as carbon steel and stainless steel tubes.

Thread Connection

1/4” 28 Gauge, 1/4” BSW, 3/8 BSW, and 1/2” BSW.

Size

Brass, Nylon from 1/4” to 1 “
Steel size range from 1/4” to 8”

Spiral Tube Brush