Model
Motor HP (KW)
Speed
Recommended Shaft Core
diameter/length
FDM-WD 1.0
1 (0.75)
220V/ 50Hz/ 1 Phase
1,415 rpm
8, 10 mm
Max 50ft
FDM-WD 1.5
1.5 (1.1)
220V/ 50Hz/ 1 Phase
1,415 rpm
12 mm
Max 50ft
FDM-WD 3
2 (1.5)
415V/ 50Hz/ 3 Phase
1,415 rpm
12 mm
Max 60ft
FDM-WD 3

3 (2.0)
415V/ 50Hz/ 3 Phase
1,415 rpm
12 and 15 mm
Max 80ft
Electric Powered
-
FDM-WD electric powered tube cleaner comes along with water-proof IP65 PVC enclosure terminal box and 24VDC foot switch. Interchangeable flexible shaft connection allows wet or dry cleaning options.
-
It makes cleaning of tubes an easy and pleasant task. Typical applications includes heat exchanges, condensers, evaporators, absorptions machines and chillers.
Model
Flexible Shaft Speed
Air Motor Power
Air requirement
AWP100X

Variable-
500~3,000 rpm

1.8 HP
Max
100 PSI @ 70 CFM
Output torque : 46 lb in @ 2,500rpm
AWP100XX
Variable-
500~3,000 rpm
4 HP
Max
100 PSI @ 130 CFM
Output torque : 82 lb in @ 3,000rpm
Air Powered
-
The AWP series Air powered tube cleaner machine is applicable where electricity supply is unavailable.
-
Equipped with remote foot switch, It is portable and easy to operate. Simultanoues flush with water is possible to remove scale more effectively. Adjustable torque control enables rotation of shaft to be set at required speed in different application.

FLEXIDRIVE flexible shafts offers Nylon and Galvanized steel casing for different cleaning purposes. Where simultaneous water flush is required, wet cleaning is possible by attaching our nylon casing flexible shaft to the tube cleaner machine.

Galvanized steel casing flexible shafts are designed for its durability. Its heavy construction is well suited for most dry cleaning situations.
 
 
Shaft No/ Length
 1/8" Core x 6mm Casing OD
S701-25
 1/4" Core x 10mm Casing OD
S702-45
 5/16" Core x 12mm Casing OD
S703-25
S703-45
 3/8" Core x 14mm Casing OD
S704-25
S704-35
 1/2" Core x 18mm Casing OD
S720-35
S720-40
S720-50
 5/8" Core x 22mm Casing OD
S722-40
S722-50


 
Length
 3/8" Core x 19mm Casing OD
 
x 20 ft
x 26 ft
 1/2" Core x 24mm Casing OD
 
x 23 ft
x 26 ft
x 32 ft
 5/8" Core x 29mm Casing OD
 
x 23 ft
x 26 ft
x 32 ft
x 40 ft
x 45 ft
x 50 ft
x 60 ft
x 70 ft



Rotary Cutter
The orthodox tool for the removal of hard scale from straight and curved boiler tubes, etc.

Double Cone Cutter
Same as Single Cone Cutter but in double form.

Single Cone Cutter
Cone shaped cutter designed to penetrate through hard scales.

Disc Cone Cutter
Consisting of three cones, in a disc form assembly.
Tapered Cutter
Fast and safe removal of hard lining of scale, typically used in evaporator and juice heater tubes.

Pivoted Arm Cutter
Consisting of three arms and a small cone in each arm to provide a slight “drilling” effect.

 

Description
Brass and Nylon are recommended in removing softer scales for non-ferrous condensor or heat exchanger tubes. Steel is suitable for ferrous metals such as carbon steel and stainless steel tubes.
Thread Connection
1/4” 28 Gauge, 1/4” BSW, 3/8 BSW, and 1/2” BSW.
Size
Brass, Nylon from 1/4” to 1 “
Steel size range from 1/4” to 8”
Spiral Tube Brush
  

Description
In steel material, circular wheel form. The design favours cleaning of bended tubes
Size
1 1/2” to 4”, 4” and above please contact factory for details
Circular Tube Brush
  
 

Description
Typically used for boilers, evaporators, juice heater and vacuum plants to remove medium to heavy scale.
Size
1 1/2” and above
Circular Tube Brush
  




Shear Pin, Lock Pin, Connectors,
Adapters and Reducers